Free NOS Jeep parts from Willys, Kaiser, AMC, and Chrysler eras

scramboleer

scramboleer

Super Moderator
Staff member
All-Star
Aug 16, 2011
12,119
San Francisco, California
First Name
Dan
Willys Model
  1. Wagon
Willys Year:
  1. 1964
Hi folks,

I am cleaning out my stash of parts and thought some of you could use these on your CJ/MJ/XJ/FSJ. Nothing too spectacular, but hey they are free:

1. NOS Mopar gasket (2) - part number 04275834
Willys parts (2015-02-13) (1).jpg
Willys parts (2015-02-13) (4).jpg

2. NOS 1997-2001 Jeep Cherokee XJ control arm .010" shims (2) - part number 52000234, fits 1997 to 2001 Jeep Cherokee XJ and Comanche MJ
Willys parts (2015-02-12) 008.jpg
Willys parts (2015-02-12) 011.jpg

3. NOS 1997-2001 Jeep Cherokee XJ control arm .090" shims (2) - part number 52003976, fits 1997 to 2001 Jeep Cherokee XJ and Comanche MJ
Willys parts (2015-02-13) (15).jpg
Willys parts (2015-02-13) (16).jpg

4. Used hood hinges (?) - FSJ (?)
Car parts (2014-12-09) 047.jpg

5.Used CJ lighter knob
Car parts (2014-12-24) (25).jpg

6. Ford engine mount (Anchor 2331) for 240 and 300 six cylinders (I think)
Willys parts (2015-03-26) 005.jpg

PM me and we'll figure out shipping.
 
All,

The above parts 1-5 are still available. In addition, here are some NOS or excellent used parts that are also available for free. Most are Jeep, but there may be some AMC car stuff too:

#1 Shackle bolt set? Bolt length of 3 and 1/2", with center part ~ 2". Part number 427298. Includes rubber bushings. (Spoken for and shipped 10/3/2016)
image.jpg

#2 Kaiser-Jeep part K735674. Some kind of transmission or transfer case spacer. Length ~5" and diameter ~1".
image.jpg

#3 Mini clamp, part number 941441
image.jpg

#4 License plate lens cover, length 4", width 2 and 1/8" (Spoken for and shipped 10/3/2016)
image.jpg

#5 Nearly solid rod. Length ~ 3 and 3/8", diameter ~ 5/8"
image.jpg

#6 Trans spacer, part number 802414. Length ~3", diameter ~ 15/16"
image.jpg

#7 (gone)
image.jpg

#8 Clamps, threaded. Length ~ 2 and 1/4" by width ~1".
image.jpg
 

Attachments

  • image.jpg
    image.jpg
    78.1 KB · Views: 25
Last edited:
#9 Rubber mount. Outer diameter is ~ 1 and 9/16". Inner diameter is ~ 17/32". Height is ~1 and 1/8".
image.jpg

#10 Outer diameter is 1 and 3/8". Inner diameter is 1/2".
image.jpg

#11 Some kind of plunger switch. You push the black rod and the back part moves in the same plane. FSJ or Jeepster glove box light switch? (Spoken for and shipped 3/4/2017)
image.jpg

#12 Some kind of rubber stop? Holes are 1.5" apart. Rubber stop is 1 and 3/8" by 7/8". (Spoken for and shipped 3/4/2017)
image.jpg

#13 Some kind of threaded cap. Rod in #14 below screws into it. Threaded diameter ~ 1 and 17/32". Overall diameter ~ 1 and 7/8". Height ~ 1". (Spoken for and shipped 3/4/2017)
image.jpg

#14 Unknown, but the threaded rod screws in to the #13 cap above.
image.jpg

#15 Brushes (2), perhaps part number 922504. Brushes have "R60" stamped on them.
image.jpg

#16 Box says part number 925652 brush set group 15-01 for Kaiser Jeep. P11-15 GJC-2012AS. Contains one brush with 6-P GJC-1012A on it.
image.jpg
 
Last edited:
Part number four looks like a license plate light cover for a Willys wagon. If that's the case, I could use that!
Thanks,
David
 
Do you know anything about the #1 in fits from your second post?
 
mathman said:
Do you know anything about the #1 in fits from your second post?
Click to expand...

Thanks David. I added info above, but here's what I can tell: Shackle bolt set? Bolt length of 3 and 1/2", with center part ~ 2". Part number 427298. Includes rubber bushings.
 
scramboleer said:
Thanks David. I added info above, but here's what I can tell: Shackle bolt set? Bolt length of 3 and 1/2", with center part ~ 2". Part number 427298. Includes rubber bushings.
Click to expand...

I'll take those off your hands - PM sent...
 
Just like my favorite old time coach Woody Hayes used to say,
"Pay it forward".that is a classy thing to do Dan, my hats off to
you!
 
Some other opinions online suggested possible names for the free parts:

#5 - Bellcrank for a clutch OR maybe a shift fork for a T-case
#7 - Definitely a door courtesy light switch for a 1962-1984 Jeep (found the part number in a newer parts manual) (gone)
#9 - Maybe a torque bushing
#11 - Maybe a glove box light switch similar to #7 for FSJ or Jeepster (Spoken for and shipped 3/4/2017)
#12 - Maybe the world's smallest bump stop? (Spoken for and shipped 3/4/2017)
#13 - Master cylinder cap? (Spoken for and shipped 3/4/2017)

All free. All available unless noted in red in original posting on page 1.
 
Last edited:
I'd like #7,11 and 12 please. And probably 13, if no one else is desperate for it (I'd like to make my own remote filler). You don't happen to have a dome light (doesn't have to be NOS), do you?
I'll PM you. Thanks for making all this available! Great way to make some drawer space.
John
 
Dan, you are awesome for doing this....I am thrilled to have the license plate lens from you! Thanks a million!
David
 
SanJuanDigger said:
I'd like #7,11 and 12 please. And probably 13, if no one else is desperate for it (I'd like to make my own remote filler). You don't happen to have a dome light (doesn't have to be NOS), do you?
I'll PM you. Thanks for making all this available! Great way to make some drawer space.
John
Click to expand...

John,

Got your PM. 11, 12, and 13 shipped to you today. No need to cover shipping; just buy an extra box of Girl Scout cookies or PTA raffle ticket the next time some kid comes knocking at your door (do kids do that anymore???).

Cheers!


Scramboleer
 
Last edited:
david0225 said:
Dan, you are awesome for doing this....I am thrilled to have the license plate lens from you! Thanks a million!
David
Click to expand...


No problem David. Happy to help in some small way. I've certainly gotten plenty of help and parts over the years with my Willys (and now gone Model A).

Cheers!
 
Last edited:
You must log in or register to reply here.
Back
Top