truck

I'm working on fitting the cab back to the frame and for the life of me I cant remember what these two brackets are for. I've got the cab mounts figured out (thanks to Vintage Don), but these have me stumped. Embarrassed to say I dont have a picture of these before I took it apart. Any ideas...

My project is a 1958 pick up. I want to service the generator but cant figure out this nut. Do I need a special tool?

This was found in a basement behind an old woodpile. It was in the basement for at least the last 30 years. I was thinking maybe it goes to a Willys truck or wagon and not sure if it is homemade.

Guys, just wanted to make a quick post on the rear axle from my '47 truck. Discovered Austin's (@Dual48s) amazing post (Ole & Lena... A Love Story) on this subject and wanted to share my experience. I took Austin's advice and made a puller for the pinion. My first attempt using a bearing...

Hello everyone, my name is Andy and this morning I'm feeling very thankful for finding this forum. I'm in the middle of a frame off restoration of my grandfathers '47 pickup and was thoroughly confused by the rear (Timken) axle. @Vintage Don's posts on this subject are invaluable. Ok, more...

I'm in the process of installing reproduction floor pans into a 1957 Willys Pickup Truck. The driver's side reproduction floor pan came with a pattern/drawing around the pedal area and I'm not sure what to do with it because the original floor pan was non existent. I don't know if that area...

So I'm getting the F-head in my 51 pickup rebuilt due to the back two exhaust valves being burnt, cylinders are still in good shape with minimal scoring(engine was rebuilt in the 80's), i pulled a spare engine apart that i got from a parts truck and the back two valves were burnt as well so it...

Hi friends, I`v been reading about spring over axle conversions and read a lot "don`t do it".. Now I'm a little curious as I wonder if I have a different control arm than normal in my 58 Willys Truck? With my thinking I will be able to move the axle under the springs and just move the steering...

Hi, I´v just bought an 1958 Willys Fire Truck (second to last build in 1957) with only 5600 miles on the meter. I´v worked as firefighter for the last 16 years and are now running my own experience company The Arctic Drive in the northern part of Norway, above the Arctic Circle. I will use It...

Hello, I am René from the Netherlands. I hope you understand the crappy English i use, as i am Dutch. Me and my son Chevy have bougt a full size 1961 Willys little firetruck, wide track and 118 inch wheelbase. We like Firetrucks because they often look good, are taken care for and often...

I have a trailer made from a 1949 (I"m told) pickup truck. The tail lights appear to be original equipment. Today I needed to remove them and every one of the mounting bolts broke with very little effort. Even the bulbs are rusted in place but the lenses are good. I have some WD-40 soaking...

Hello everybody. I'll start off by saying my name is Woody and I'm new to the Forum. My Willy's is a 1950 Truck. I've always been a Jeep Guy. A few years ago I bought a 95 Wrangler and I put a lot of work into it. New suspension parts new frame all kinds of stuff hard top doors I just...

Hello All, Joining this forum for a friend who is looking to sell is CJ-2A! I'm not as knowledgeable on the Jeep front (more of a BMW 2002 guy) but this forum seemed like a great place to start. Any thoughts on where to best put his Jeep up for sale and what a fair price would be is greatly...

1948 2WD truck, Mustang II front end w/rack and pinion and PDB, hanging brake pedal, Chevrolet V8, TH350 transmission, Ford trac loc 9", larger fuel tank, I've been working on this truck for a customer for the last few months. We are not going to do any paintwork on the exterior right now...

my grandfather gave me this truck he got from the scrap yard about to be crushed. I've had it a year and got it running it was all original when I got it with super hurricane motor and 3 speed. I ripped out all the wiring out and re wired the entire truck. Converted it to 12v using a gm...

I purchased a 61 truck recently and need some help. I'm trying to get the old vacuum wipers working, but can't figure out what the vacuum line from the motor connects too?? Any pictures or answers is greatly appreciated!

Hi everyone, new here. I bought a "56 Willys pickup" but the grill loooks like a 53. What exactly will help me figure out the exact year? can't use the engine, it's a M37 flat 6. I know that most parts are interchangeable between all models, but if there are other things like the grill to help...

I'm Nick. I've picked up a '50 truck pretty complete but no motor and a '62 chassis complete with a Tornado motor and am deciding how to procede. Thinking of putting all Ford running gear, motor and auto trans under/on the '50 frame with a mild lift and go! Then find a cab for the '62 and...

my 1959's bed has seen better days, and if i take it off to repair i could see the truck being bed less for a year or better i was looking around online for ideas on wooden beds so i could still enjoy the truck and i came across a guy that had made a bed for his 38 chevy truck I am a...

I am looking for a complete and running 6-226 12V. If anybody has one or any leads please let me know. Thanks