Senior
Bigger Hammer
I went with with a 4.3 kept T90 and Transfer case stock, It scoots ! very happy. But definitely rebuild the tranny and transfer case, you wont regret it !
NOVAK techs were great help on selecting parts, go to their web site and read their Tech stuff. Pay attention to Bell housing and clutch designs, flywheels etc. you can call them, they are pretty cool. Just remember Bell housing will dictate what size pressure plate and clutch. Some early bell housing can only fit using the correct size flywheel and clutch system, Buy your clutch and pressure plate from them comes with throw out bearing , they have the best price, Jegs for flywheel and starter. Also make sure you pay attention to retainer tube, that is what the throwout bearing rides on. It needs to be longer then stock,
NOVAK techs were great help on selecting parts, go to their web site and read their Tech stuff. Pay attention to Bell housing and clutch designs, flywheels etc. you can call them, they are pretty cool. Just remember Bell housing will dictate what size pressure plate and clutch. Some early bell housing can only fit using the correct size flywheel and clutch system, Buy your clutch and pressure plate from them comes with throw out bearing , they have the best price, Jegs for flywheel and starter. Also make sure you pay attention to retainer tube, that is what the throwout bearing rides on. It needs to be longer then stock,
Last edited: