Likes Likes:  1
Results 1 to 4 of 4

Thread: HELP! Cleveland U-Joints

  1. #1
    Gear Grinder
    First Name
    Eric
    Year
    1960
    Model
    Join Date
    Aug 2017
    Location
    NC
    Posts
    3
    Post Thanks / Like

    HELP! Cleveland U-Joints

    I have a 1960 CJ5 that came equipped with the small cap Cleveland U-joints. The caps are .9375 and the the overall width is the same as a 1310 at 3.224 but the proper way to measure a Cleveland is at the inside c-clip location which is 2.375. There is another gentleman on the Kaiser Wills page that has the same joints ad was told they were never on these Jeeps. This CJ is all original drive train and the same joints his 1960 has so that might not be concrete evidence that it was factory but is pretty good circumstantial evidence. Either way it is what my Jeep has, so I need a source for new u-joints. If not I can get a rear drive shft from a 1966 CJ5 that had a V6. Are the shafts from V6 models the same length as a 4cyl model? Thanks in advance for any help.
    Eric

  2. #2
    Gear Grinder
    First Name
    Eric
    Year
    1960
    Model
    Join Date
    Aug 2017
    Location
    NC
    Posts
    3
    Post Thanks / Like
    Here is the page the other person needing these joints was commenting on. https://www.kaiserwillys.com/categor...-station-wagon

  3. #3
    Gear Grinder
    First Name
    Eric
    Year
    1960
    Model
    Join Date
    Aug 2017
    Location
    NC
    Posts
    3
    Post Thanks / Like

    Cool

    24139136_10155896944723805_1200926933_o.jpg Gratuitous photo for effect!

  4. #4
    Well-Oiled
    First Name
    Greg
    Year
    1963
    Model
    Wagon
    Join Date
    Oct 2011
    Location
    Wrentham Ma.
    Posts
    3,006
    Post Thanks / Like